• SLSC RTI-12303
  • RTI 12303 - JR1 / JR2 / JR3 / JR4 / JR5
  • Rückseite
  • Abmessung / Bemaßung

SLSC RTI – 12303

RTI to connect 16/32 Channels from any level 1 compliance SLSC card to four NanoFit connectors cables.
 
At the back of a SLSC chassis, screw mounted Rear Transition Interfaces (RTIs) contact the signal connector of the SLSC card and transfer the signals to several hardware of National Instruments. At the back of the RTI are in turn other plugs for the transmission of the signals.
 

 

Category:

Technical Data

Temperature Range0°C – 80°C
Humidity10% – 90% relative, non-condensing
Operation altitude<2000m
Dimensionsappr. 101,9mm x 30,2mm
Connectors
XP2
Voltagemax. 32VDC to ground or to an other contact within the connector
AI and AO lines shall be limited to +/- 10V
Currentmax: 0.75A per contact at 30°C temperature
XP3
Voltagemax. 60VDC to ground or to an other contact within the connector
Currentmax: 8A per contact at 30°C temperature
JR1
Voltagemax. 60VDC to ground or to an other contact within the connector
Currentmax: 8A per contact at 30°C temperature
JR2-JR5
Voltagemax. 32VDC to ground or to an other contact within the connector
AI and AO lines shall be limited to +/- 10V
Currentmax: 0.75A per contact at 30°C temperature

Downloads

Datasheet RTI
Datasheet RTI (pdf, 1,83MB)