• SET-1310 32Ch Isolated Input Card
  • Aufbau-R

SET-1310 32Ch Isolated Input Card

400,00 plus VAT

The SET-1310 32Ch Isolated Input Card is an isolated digital input interface for NI-SLSC. This card provides 32 optically isolated digital inputs. SET-1310 combines high-density IO with high isolation voltages and a wide input voltage range. It allows to break ground loops and protect your system from high-voltage spikes, but also to connect high voltage signals to standard logic level acquisition devices. The channel-to-channel isolation allows to connect signals from different DUTs to a single acquisition system without compromises.

The digital inputs feature a wide supply voltage range and can be used with a variety of signal levels, including 12V and 28V discrete signals.

The high-speed, high-sensitivity optoisolators allow reliable input detection with an input current as low as 0.6mA. To protect the optoisolators, each input contains a current limiting circuit which limits the input current to 6mA over the entire input voltage range.

With a maximum voltage between channels and between channel and chassis of 100Vdc, SET-1310 allows you to connect multiple DUTs operating at most usual logic levels to a single data acquisition system.

Applications

  • 32 isolated inputs
  • Enables DUT characterization required in parametric testing
  • Isolation of computer from field devices
  • Breaking ground loops
  • High sensitivity current digital input

 

Features

  • Galvanic channel to channel and rack isolation
  • Large input voltage range – 0 to 60V
  • 32 optically isolated digital inputs
  • Isolation voltage:
    • 70 VRMS
    • 100 VDC
  • Wide input voltage range
  • Input current limited to 6mA over entire input voltage range
  • Input reverse protection up to -60V

 

 

SKU: 93005 Category:

Absolute Maximum Ratings

ConditionValue
Max. Input VoltageAny Pin60Vdc
Min. Input VoltageAny Pin-60VdcC
Channel to Channel 120Vdc
Channels to Chassis 60Vdc

 

Technical Data

ConditionValueComment
Max. Input Voltage 60VOverall temp range
Min. High Level Input Voltage 2,3V 
Input CurrentVIN > 5V4mA ± 2mA 
Propagati on DelayAny Channel,
Rising Edge
Typ: 2.7μs
Max: 3.6μs
Overall temp range
Any Channel,
Falling Edge
Typ: 8. 4μs
Max: 12.5μs
Overall temp range

 

Environmental

ConditionValue
Operating humidityRelative,
non-condensing
10%-90%
Storage humidityRelative,
non-condensing
5%-95%
Operating temperatureForced-air cooling from chassis0°C-85°C
Storage temperature -40°C-100°C
Maximum altitude 2000m

Downloads

Manual SET-1310 32Ch Isolated Input Card
Manual SET 1310 (pdf, 770KB)