SMARTbrick 2000C – PT100 / PT1000 EMULATOR2018-11-12T10:04:55+00:00

SMARTbrick 2000C – PT100 / PT1000 EMULATOR

Electronic emulation of a PT100 / PT1000 temperature sensor as an ohmic resistor

  • SMARTbrick 2000C – PT100 / PT1000 EMULATOR
With the SMARTbrick 2000C, a PT100/PT1000 type temperature sensor is electronically emulated as ohmic resistance via an analog-digital control circuit. The single-channel resistor emulation emulates an electrical “two-pole network” and is galvanically isolated from the remaining test system. A line break / short-circuit can be stimulated individually for each channel for error stimulations. The resistance value, sensor type and the error stimulation are specified in connection with the carrier board via CAN bus.
Channels1
Input voltagemax. +10 V (not protected against polarity reversal)
Min measurement current100 µA
Simulation range Pt10090 Ω – 200 Ω
Setting accuracy Pt100< 0.3 Ω
Simulation range Pt1000900 Ω – 4000 Ω
Setting accuracy Pt1000900 – 2000 Ω: < 2 Ω
2000 – 3500 Ω: < 6 Ω
3500 – 4000 Ω: < 8 Ω
Accuracy of the st value< 1%
Insulation voltagemax. 50 VDC
Insulation resistance> 1 MΩ
Internal resistance in short circuitmax. 3.5 Ω
Maximum current during error simulation short circuit10 mA
Modulfunctions
Selection PT100/PT1000via software

Setting the resistance value
Error stimulation “line breagage”via software
Error stimulation “short circuit”via software
Display of error stimuliesvia LEDs

Additional Products

SET-14XX Modular Cards
SLSC-14XX Modular Cards

Contact

You have questions? Our team is always happy to answer your questions: +49 7522 916 87 600
Or just write an E-Mail to smartbrick.support@smart-e-tech.de.