SMARTbrick 2100A – DUAL K-SENSOR EMULATOR
Simulating two Type K thermocouples
A line break can be stimulated individually for each channel for error stimulations. The voltage amplitude, sensor type and the error stimulation are specified in connection with the carrier board via CAN bus. The superordinate test system already takes the temperature of the reference junction into account when specifying the voltage value.
|Max. gain error||< 1%|
|Max. offset voltage||200 µV|
|Cutoff frequency||10 Hz|
|Output voltage range||0.2 – 60 mV|
|Max. output voltage||5 mA|
|Insulation voltage||max. 50 V|
|Insulation resistance||1 MΩ (± 5%)|
|Error stimulation “line breagage”||via software|
|Error stimulation “short circuit”||via the voltage 0mV|
|Display of error stimulies||via LEDs|
|SLSC-14XX Modular Cards|
You have questions? Our team is always happy to answer your questions: +49 7522 916 87 600
Or just write an E-Mail to firstname.lastname@example.org.