RTD-SIM (PT100/PT1000) Card
High-precision resistance thermometer simulator
The SET-1215 RTD simulation card is a high precision 16 channel resistance temperature detector simulator.
The simulation range is from 90 Ohm to 410 Ohm and 900 Ohm to 4100 Ohm with an accuracy up to 1°C.
It contains 16 galvanic isolated channels which can be connected in 2-terminal sensing and 4-terminal sensing.
Each channel of the SET-1215 card is able to simulate the common short circuit and open circuit conditions, which could be experienced in a system due to faulty wiring or sensors.
To maximize customizability, the SET-1215 have two plug-in module slots that can provide features like line fault insertion and instrument connect. Additionally, the SET-1215 RTD Card comes with a high current fault injection bus.
Absolute Maximum Ratings
|Max. Input Voltage||Any Pin to Chassis GND||60 VDC||Transient 65V,|
Limited by connector
|Min. Input Voltage||Any Pin to Chassis GND||-60 VDC|
|Max. Input Voltage||Between CHx_F+ and ChxF-||15 V|
|Min. Input Voltage||Between CHx_F+ and ChxF-||-0.3 V|
|Max. Short Circuit Current||1.5 A|
|Max. Simulation Current||10 mA|
|Min. Simulation Current||100 µA|
|Max. Switching Power||DC, Resistive load||60 W|
|Max. Simulation Power||400 mW|
|Max. Simulation Voltage||Between CHx_F+ and ChxF-||10 V|
|Min. Simulation Voltage||Between CHx_F+ and ChxF-||0 V|
|Resistor Value Update Time||50 µs||SLSC communication delay not included|
|Simulation Resolution||PT100 configuration||0.1 Ω|
|PT1000 configuration||1 Ω|
|Initial Resistance||< 10 M|
|Expected Electrical Relay Lifetime||1A, 30VDC resistive||Min 105 operations|
|2 A, 30 VDC resistive||Min 104 operations|
|Module Dimensions||Excluding ejector||144.32mm x 30.48mm x 302mm (H x W x D)||Standard SLSC card size|
|Front Panel Connector||2x female DB -44 high-density D-Sub with 4-40 UNC screw lock||For mating connectors and cables, contact us|
|RTI Connector||2mm hard metric per IEC 61076-101||Any RTI marked|
|10% – 90%|
|5% – 95%|
|Operating Temperature||Forced-air cooling from chassis||0 °C – 40 °C|
|Storage Temperature||-40 °C – 85 °C|
|Maximum Altitude||2000 m|
- HiL Test Systeme
You have questions? Our team is always happy to answer your questions: +49 7522 916 87 600
Or just write an E-Mail to firstname.lastname@example.org.